how to make led lights black

In addition you must get the. Turn on your LED light strips.

Pin On Led Lights

In order to make RGB colors you need two resistors instead of one.

. If you want to get creative with your led light colors then follow these steps and make your own custom led lights. For this method you will need an old remote control that has stopped working for some reason or another and a fluorescent bulb of your choice. Now place the final layer of tape.

You only need the following. Our LEDs are from. Make sure you cut them in the right length and width.

Using the remote you have to access the DIY mode. Other substances that emit a fluorescent. Twist the exposed wire together and twist on a wire.

If you already have the LED strips installed you have to push the remote control. Color the tape blue. BUY THESE LIGHTS HERE164 feet.

Find a Lamp Socket Cord and Light Cover. To the kids that are about to targettargeting me in the commentssaying stuff along the lines of wishing for deathpain upon me telling me how to make act. Trim off any excess wire on LED light strips for neatness and convenience.

After the bulb dries completely apply two coats of a UV paint of your choice. How To Make Black Light With Led Lights The most interesting things to glow under black light are urine semen and blood. Httpsamznto2Kg8gfX Join my Discord.

Use a Remote Control. Press the red button a total of 25 times. Usually the soldered side has extra wiring than the opposite end with a power adaptor connection.

To do this first solder a small jumper wire between PIN 1 and PIN 2 on your buck converter. Cut the led strip. Strip the insulation off the wires ends with the wire strippers.

Make sure to like comment and subscribe LEDlights shorts. Repeat steps 1 2. -1 Get the led strip or led tape of desired length.

This is the main step in this method. Press any DIY Color Setting button on the distance. Make sure the first coat dries before applying the second one.

Prepare to work with the LEDs by cutting them into appropriate sizes. Making a black light from a light bulb is the easiest approved way one gets a black light. Make sure you have the right parts for your lamp socket to work with the bulb you purchased.

Press the red. Press the red color button 25 times. Method Used to Make a Blacklight with your Phone.

Cut the led strip light to the desired length with the wire cutters. Prepare to Work with LEDs. Cover the light with one piece of tape.

This is a pretty straightforward process so if you have already installed the LED strips all you have to do is. Press the blue color button 25 times. Press the red shading button approximately 25 times.

Now press the blue button for a total of 25 times. Press the blue shading button a similar. Once you access this mode you will have to do the following steps.

Led Light Diy Colours Part 2 Led Lighting Diy Led Lights Led Room Lighting